Belt color sorter is widely used in food and resource recycling processing. 1.The processing capacity. The processing capacity is the amount of materials that can be processed per hour. The main factors affecting the processing capacity per unit time are the movement speed of the servo system, the maximum speed of the conveyor belt and the purity of the raw materials. The fast movement speed of the servo system can quickly send the actuator to the position corresponding to the impurity, which can also increase the speed of the conveyor belt and increase the processing capacity, otherwise the speed of the conveyor belt must be reduced. The processing capacity per unit time is directly proportional to the moving speed of the conveyor belt, the faster the conveyor belt speed, the greater the output. The processing capacity per unit time is also related to the proportion of impurities contained in raw materials. If there are few impurities, the larger the interval between two impurities, the longer the reaction time left for the servo system, and the speed of the conveyor belt can be increased. At the same time, the processing capacity per unit time is closely related to the required selection accuracy. 2.Color sorting accuracy. Color sorting accuracy refers to the percentage of the number of impurities selected from raw materials to the total amount of impurities contained. The color sorting accuracy is mainly related to the moving speed of the conveyor belt and the purity of the raw materials. The slower the moving speed of the conveyor belt, the longer the time between adjacent impurities. The servo system has enough time to remove impurities and improve the color sorting accuracy. Similarly, the higher the initial purity of the raw material, the less the amount of impurities, and the higher the color sorting accuracy. At the same time, the color selection accuracy is also limited by the design of the servo system itself. When there are more than two impurities in the same frame of image, only one impurity can be removed, and the color selection accuracy decreases. The multiple selection structure is better than the single selection structure. 3.The take-out ratio refers to the ratio of the amount of impurities in the waste selected by the color sorter to the amount of normal materials. The level of the take-out ratio can be adjusted, and the adjustment of the take-out ratio is mainly completed by adjusting the energization time of the actuator. If the take-out ratio is set too high, it will affect the two indicators of selection rate and processing capacity; if it is set too low, the selected waste contains too much normal material, which will cause waste; if it is reprocessed, it will need to invest A certain amount of manpower and material resources will cause a lot of trouble and economic loss. In the actual production process, the three indicators of processing capacity, color sorting accuracy and take-out ratio are integrated, and they are all key indicators, which must be investigated at the same time.

In the previous era when technology was relatively backward, manual labor became the main productivity of screening products. We can clearly see in the market that high-quality products will be more expensive and popular at the same time; Machine selection, product quality at a glance, speed up. As an intelligent high-tech product, what is the working principle of the color sorter? TOPSORT technology takes you into the door of color sorter technology. The color sorter is a device that uses photoelectric detection technology to automatically sort out the different-color particles in the granular material according to the difference in the optical properties of the material. A very official explanation, I believe most people can’t understand it, in fact, you may understand it another way; the color sorter is like a person, with a camera equivalent to the human eye to observe the product. If it is broken, there are spray valves equivalent to human hands. When the camera catches a bad product, the spray valve blows it out. This is how the color sorter works. How does the color sorter work? Let's look at a picture below. 1. The material enters the machine from the collecting hopper on the top, and the selected material falls down along the feeding distribution chute through the vibration of the feeding device (vibrator). 2. The material passes through the vibrator at the upper end of the chute, and the material slides into the sorting box at an accelerated speed along the chute. 3. After entering the sorting box, it passes between the image processing sensor CCD and the background equipment. Under the action of the light source, the CCD receives the synthetic optical signal from the selected material, and the system generates an output signal, which is amplified and transmitted to the FPGA + ARM computing processing system, and then the control system issues instructions to drive the injection solenoid valve to blow the particles of different colors Flows away in and out of the waste cavity of the hopper. 4. The selected materials continue to fall into the finished product chamber of the hopper and flow out, so that the selected materials can achieve the purpose of selection. How does the color sorter work? The above is the workflow of the color sorter. According to the survey, most of the processing manufacturers in the market are already using the color sorters of Xingtai Hongche Technology. At the same time, with the help of the color sorter of TOPSORT technology, customers become bigger and stronger, and truly realize the freedom of wealth.